RaptorSource.com
Other Quads => 'Other' General Discussion => Topic started by: Warren on July 16, 2008, 05:17:10 PM
-
some of you may have read my thread about my issues getting the slip-on onto the wolvy. well i found out that i just gave up on it too soon.
i ended up having to filing out the mounting holes to get the bolts to go in but i got it. and that was the only other issue. the cleanace issue went away when i got the bolt tightened down.
when i started it up i could deffinently tell there was an HMF on there. a really deep rumble at idle and a really loud high end. i took it out for a test ride and my first impressions were basically disappointing. but then the engine got warmed up. and holy shit this thing came alive. it can wheelie now without holding the brake, revving it up and yanking my sholder out of socket to get the front end off the ground. all you have to do is give it the gas and a little tug and shes going skyward. from a dead stop when you punch the gas the rear tires spin alittle and the front tires come off the ground about an inch (not much, but for this big thing with a 280 pound jockey on it's back thats alot) when rolling down the road you can still feel the power when you punch the gas. EDIT: i forgot to put in here that the top end was effected too. i gained 2 MPH on the top end. and again that is with a 280 pound rider.
i am really happy with this exhaust and how well it performs. it sounds great and has the power to back it up. i would highly recommend this pipe to anyone in the market for a 450 wolverine exhaust.
if anyone has any questions about it let me know i will answer them as best i can.
i'll try post videos of before and after and pics maybe this weekend. :thumbs:
here's a few pics and vids of the new pipe.
pics of the install
(http://i32.photobucket.com/albums/d31/warno_p/HMF7.jpg)
(http://i32.photobucket.com/albums/d31/warno_p/HMF8.jpg)
(http://i32.photobucket.com/albums/d31/warno_p/HMF9.jpg)
here's a video of before the pipe install.
(http://i32.photobucket.com/albums/d31/warno_p/th_P7110521.jpg) (http://s32.photobucket.com/albums/d31/warno_p/?action=view¤t=P7110521.flv)
and here's one of after. (it's kind of sputterine because it's not warmed up yet)
(http://i32.photobucket.com/albums/d31/warno_p/th_P7190586.jpg) (http://s32.photobucket.com/albums/d31/warno_p/?action=view¤t=P7190586.flv)
here's a video i took when we were rolling down the road. (near the end i tried zooming in on the speedometer but it couldn't focus)
(http://i32.photobucket.com/albums/d31/warno_p/th_P7190588.jpg) (http://s32.photobucket.com/albums/d31/warno_p/?action=view¤t=P7190588.flv)
and here's another of us rolling down the road.
(http://i32.photobucket.com/albums/d31/warno_p/th_P7190587.jpg) (http://s32.photobucket.com/albums/d31/warno_p/?action=view¤t=P7190587.flv)
-
What was the price of the exhaust? Also did you put a different intake on it?
-
the price was $250 for the slip-on straight from HMF. and i haven't got a different intake put on it yet. i'm going to be making a custom air box to accept a clamp on style K&N filter. and i will be running a #145 main jet when i get it.
-
Good stuff. I'm about 3 months behind you I think :thumbs:
-
Good stuff. I'm about 3 months behind you I think :thumbs:
you have a wolvy then i take?
-
Get that jet in there and it will be even better...my wolverine with the HMF, dynojet kit, and hauck clutch would run dead even with my buddys old grizz 700 up until about 50, then he crawls by me. For tight trails where you dont get much over 35-40, this is the perfect quad in my opinion.
here is a sound clip of mine
http://www.youtube.com/watch?v=DUYdHQbFkto
and here is a quick 0-50 run....its no raptor, but quick for a little 450 4x4.
http://www.youtube.com/watch?v=OZoV4D70XDw
-
Sounds good. The pickup seems a ton better than stock
-
hey langford your wolvy sounds about like mine. i have the vector tip on mine though. i can't wait to get my jet and airbox built. :clap:
i'll try to get my pics and vids up this weekend. :thumbs:
-
i added the pics and vids to the original post. let me know what you guys think.
-
sweet! Sounds mean. what does the woman think of it?
Also, I love haulin ass on backroads like that. :thumbs:
Low end good? i read before that you get a ton of top end, not much low.
-
Good stuff. I'm about 3 months behind you I think :thumbs:
How about replacing those soft front shocks
-
Good stuff. I'm about 3 months behind you I think :thumbs:
you have a wolvy then i take?
Yes
-
sweet! Sounds mean. what does the woman think of it?
Also, I love haulin ass on backroads like that. :thumbs:
Low end good? i read before that you get a ton of top end, not much low.
she can tell there is more power. i think she's alittle scared to use all of it now. she didn't want to try a wheelie when i asked if she wanted to. lol. and yeah the low end is alot better. with my big ass on it, it still gets up and goes like hell.
Good stuff. I'm about 3 months behind you I think :thumbs:
How about replacing those soft front shocks
who makes after market shocks for the wolverine?
-
Elka makes shocks for the Wovly
-
Elka makes shocks for the Wovly
do you know if anyone else does. elkas are a bit pricey. lol
-
Elka makes shocks for the Wovly
do you know if anyone else does. elkas are a bit pricey. lol
I think they are on Ebay for like $500 there non rez but any thing would be better than whats on it
-
Here is the link http://cgi.ebay.com/ebaymotors/Parts-Accessories___Elka-Suspension-Front-Shocks-Yamaha-Wolverine-350-450_W0QQitemZ200239581840QQddnZPartsQ20Q26Q20AccessoriesQQddiZ2811QQcmdZViewItem?_trksid=p3286.m20.l1116
-
Warren
I looked at the bottom of the line Elka's for $4-500
I don't know what the problem is, spring rate or valving?
New springs are $80 I think. If they are easy to install then $160 to fix the soft shocks isn't bad.
-
i haven't really noticed anything bad about the suspension. i don't ride it most of the time my G/F does. but i was just asking for future reference.
-
Elka makes shocks for the Wovly
do you know if anyone else does. elkas are a bit pricey. lol
their utility series for the wolvy are about 4-$500.
-
heres their price chart, wolvy is at the very bottom.
http://www.elkasuspension.com/products/sportsutilityatv-chart.html#yamaha
-
i meant $400- $500
-
works also makes shocks for the wolvy....one of the magazines did a review on them and seemed pretty pleased with the swap. I dont ride mine anymore, so I'm not to worried about it..lol.
-
i meant $400- $500
I know what you meant :lol:
-
i haven't really noticed anything bad about the suspension. i don't ride it most of the time my G/F does. but i was just asking for future reference.
I rode my sister's Wolvy with low hours & was riding under 5 mph, the front end rolls hard during an extreme turn at low speeds ::)
-
Cough, off topic, cough :thumbs:
-
Hey Warren
Sorry for the thread derailment, I deleted most of my stupid posts.
-
Hey Warren
Sorry for the thread derailment, I deleted most of my stupid posts.
You scared him Colorado. :help:
j/k, very honorable of you, bert. You got a hit of Karma
-
Hey Warren
Sorry for the thread derailment, I deleted most of my stupid posts.
You scared him Colorado. :help:
j/k, very honorable of you, bert. You got a hit of Karma
Thanks Peels :)
If it was my thread I wouldn't want a couple of dumb asses posting what they could talk about on the phone
-
Hey Warren
Sorry for the thread derailment, I deleted most of my stupid posts.
You scared him Colorado. :help:
j/k, very honorable of you, bert. You got a hit of Karma
Thanks Peels :)
If it was my thread I wouldn't want a couple of dumb asses posting what they could talk about on the phone
we are all guilty of it sometimes. Warrens a good sport, though. But...
(http://www.roflcat.com/images/cats/270911970_db35fdd4ca.jpg) (http://"http://www.roflcat.com")
-
(http://www.roflcat.com/images/cats/270911970_db35fdd4ca.jpg) (http://"http://www.roflcat.com")
lol nice one peels :rofl:
-
I almost roled the thing trying to carve a side of a hill. On the down side the front end was pushing real bad
-
I threw that Jet in the mail on Saturday Warren, did it get there yet?
-
I threw that Jet in the mail on Saturday Warren, did it get there yet?
yeah i got it today. thanks a bunch man. i'll stick it in when i get the new airbox built. :thumbs: the damn air box is a pain in the ass to get out. i don't want to have to pull it out any more then is needed. lol.