RaptorSource.com
Raptor 700 Information => 700 Motor Mods => Topic started by: Krandall on September 23, 2008, 08:02:35 AM
-
I was thinking about this and may be a good thing to put up..
If you have a certain cam, could you post up the clearances that the intake/exhaust is supposed to be set for. May be a good helpful resource. :)
I'll just update the first post to keep it all together.
Stock
Intake: .005" ~ .13mm
Exhaust .008" ~ .20mm
Hot Cam Stage 2
Intake: .1mm
Exhaust: .18mm
Hot Cam Stage 3
Intake: .1mm
Exhaust: .18mm
All Megacycle
Intake: .005"
Exhaust .008"
All Web
Intake .006"-.008"
Exhaust .006"-.008"
KDS RJ
Intake: .006"
Exhaust: .008"
Barkers Cam
Intake: .005"
Exhaust: .008"
HDD 5050
Intake: .006 - .008"
Exhaust: .006 - .008"
-
Same for the stage 3.
.1mm
.18mm
-
bump ???
-
All Megacycle .005" intake/.008" exhaust
All Web .006"-.008" intake/.006"-.008" exhaust
Stock .005" intake/.008" exhaust :thumbs:
-
Sweet, thx Kenny :thumbs:
-
Hey Krandell
Stock
intake (.005 in) ~ 0.13 mm
exhaust (.008 in) ~ 0.20 mm
Just to maybe straighten out any head scratchers.
-
updated, thanks bro :thumbs:
-
*bump*
kenny, what are the clearances for the RJ :)
-
i recommend running the 5050 cam @ .006 for both intake and exhaust
-
Barkers cam
.005
.008
-
updated list @ top of the page :thumbs:
-
hey bud i got a je 12.5 piston and got a stage three hotcam what should i use on my valve clearance
-
Hot Cam Stage 3
Intake: .1mm
Exhaust: .18mm
The piston has nothing to do with valve clearances.
-
What spartan said. :)
-
So on the 5050 should I just copy the KDS RJ specs? ??? I'm gonna be doing my valve clearances in the next few days once I get the new timing plugs
-
HDD 5050
Intake: .006 - .008"
Exhaust: .006 - .008"
-
I see that :lol: I was just wondering what specs I should set mine for specifically.
-
i recommend running the 5050 cam @ .006 for both intake and exhaust
PATTY ^^^ ???
-
I thought I had heard to run it at .008 on one side of it...can't ever remember the damn thing
-
RTFM FNG!
-
There is no manual when it comes to modifications....:lol:
-
The spec sheet for my Barker RHC14 said .005 intake .006 exhaust.
-
Clearances is misspelled in the title...
-
Is valve lash set hot or cold?
-
cold
-
cold
Thank you :thumbs: