Mini-Raptors (250, 80, and 50cc) > Mini General Discussion

Brake light

(1/3) > >>

raptorfireman:
The brake light won't come on when I use the rear or front levers. Any suggestions? :help:

Livingmylife93:
Check the bulb, alot of the times they break from stuff getting thrown up at them.

There is also and adjustment above the right healguard, press down on the break to see where it is cause i cant explain it to you. Adjust that to your liking, turn it one way it comes on earlier, turn it the other it comes on later.

It tells you exactly how to do it in the owners manual if you still have it

raptorfireman:
--------------------------------------------------------------------------------

Well I spent 2 hours jacking with all the wiring and the brake pedal switch. The light is on, but won't brighten up when the brake lever is pushed. The only area I couldn't get to was the big ass bundle under the seat. Voltage and continuity were good from the bulb to the bundle and from the switch to the bundle. WTF happens in the big ass bundle of wires I don't know, so unless there are any other suggestions i'm done screwing with it. The tail light works, who needs a brake light anyway :mad:

Bert:
Did you bypass the brake light switch, maybe that's the culprit

raptorfireman:
Didn't know you could bypass the switch!  ???  Enlighten me.........PLEASE!

Navigation

[0] Message Index

[#] Next page