RaptorSource.com
Raptor 700 Information => 700 General Discussion => Topic started by: zilla273 on April 19, 2013, 05:15:57 PM
-
hi everyone i am new here, i just got my 1rst 700 raptor today, i had an 01 660 that i sold when i bought my house and now i got a really good deal on this 700, :thumbs: i got it cheap bc it wont shift into gear, it will click in gear with engine off but well not when running, i here no funny noise or anything, if its in gear and then i start it, it still acts like its in neutral ones it starts, i pulled clutch cover, clutch basket, i dont see any visaul problems, does anyone have any pointers, am i lookin at a total tare down??
-
No real way to diag it. Maybe change the oil and look for metal chunks.
Either a bent shift for or broken shift dogs.
-
ok im goin to pull engine off, is thr anyway the reverse could be parcially engaged causing it to no shift? i had a 350 warrior that would sometimes not shift bc the reverse lever ??? thr was no metal shaving in oil or in oil filter, shift shaft and inturnals are all ok up to the shift drum
-
Onlything I can say about the reverse, is try taking the cable off and wiggling the lever around. See if that helps.
I personally have never herd of that happening on the 700's.
What happens when you run it through up to 3rd or 4th then start the bike?
I'm thinking that the shift fork is bent. Since you said you drained the oil and there's no metal chunks.
-
i tryed shifting up more but it wouldnt, im in the works of taking the engine off now, thanks for your advice though man, i might do some upgrades when its apart :thumbs:
-
by the way, 81hps gota be crazy man, my old 660 was around 65hp and i thought that was nuts!!!
-
:rofl:
Mine was 67hp and THAT was nuts. Let us know how it goes w/ the motor! :thumbs:
-
by the way, 81hps gota be crazy man, my old 660 was around 65hp and i thought that was nuts!!!
Yea it takes trail riding to another level :lol:
Keep us updated. If you do have to split the cases I'd FOR SURE drop in a Hot Rod +5mm crank!