RaptorSource.com Stickers Available!
I think you could just use the RTV without using the gasket, or use a very small amount on both sides to keep it in place, but you don't want to put too much or it could leak from the cork gasket moving around and pressure from the oil pumping.
I have looked all over for the rubber and no luck I will try this one and if it dosent work i will be doing it again
I have looked all over for the rubber and no luck I will try this one and if it dosent work i will be doing it again Does any one know the tq order on the pan.
Thanks Im going to try the cork one. If it doesent work hell I will get more practice time. I looked at the pan today and noticed that 2 bolts were missing from each side Looks like they lost them and didnt replace them because theres a rtv type stuff coming out of them. Should i replace them?
Quote from: shookie on July 14, 2009, 04:07:54 PMThanks Im going to try the cork one. If it doesent work hell I will get more practice time. I looked at the pan today and noticed that 2 bolts were missing from each side Looks like they lost them and didnt replace them because theres a rtv type stuff coming out of them. Should i replace them? Yes replace them, hopefully the threads are not broken off in the block. Also I think they are 1/4-20's thread size, something in the 1/2" to 5/8" inch in length.