I was thinking about this and may be a good thing to put up..
If you have a certain cam, could you post up the clearances that the intake/exhaust is supposed to be set for. May be a good helpful resource.
I'll just update the first post to keep it all together.
Stock Intake: .005" ~ .13mm
Exhaust .008" ~ .20mm
Hot Cam Stage 2 Intake: .1mm
Exhaust: .18mm
Hot Cam Stage 3 Intake: .1mm
Exhaust: .18mm
All Megacycle Intake: .005"
Exhaust .008"
All Web Intake .006"-.008"
Exhaust .006"-.008"
KDS RJ Intake: .006"
Exhaust: .008"
Barkers Cam Intake: .005"
Exhaust: .008"
HDD 5050 Intake: .006 - .008"
Exhaust: .006 - .008"