I got these in today. Can't wait to install them tomorrow. Gonna put them to the test this weekend. 8hrs dirt trails and 8hrs sand.
(http://i399.photobucket.com/albums/pp79/4gunz4x4z/1231195876.jpg)
where the heck do u live that it isnt like minus 35 degrees celcuis :( i cant even go sledding its so cold
As long as my heart is still pump'n, I can ride. :clap:
Oklahoma, it's 20* outside. ???
well i have sold those rox risers to many a happy customer, enjoy :thumbs: as for 20*above, well i have the rappy parked in the igloo for the winter ;)
What do those little fellas go for? I figure I might as well finally raise my bars to a comfy level.
They run about $140 for the anti vibe rise. Check them out at www.tqsatv.com under the control section.
Quote from: machelis on January 07, 2009, 01:58:18 AM
What do those little fellas go for? I figure I might as well finally raise my bars to a comfy level.
^
/ \
l
l
l
I caught the sale at Tech Quad Shop and Steve shipped them to me for less then $145 total. Good guy to deal with. Thanks Steve
Michael C
Why are they only made for 1 1/8 bars?
Quote from: machelis on January 07, 2009, 11:08:17 PM
Why are they only made for 1 1/8 bars?
You can get them in 7/8 as well.
"NEW 2" Elite Anti-Vibration Risers for 7/8" and/or 1-1/8" Fat bars" Direct quote from Rox.
Yep I need to add the new elites to the site. Web guy is doing some changes to the website right now to make it even easier to navigate. Once thats done more products will follow :thumbs:
steve do you got +2 inch control cables? Mine are pretty tight with my riser
I put mine on today, they are definitely tight. I rerouted my throttle cable and it was fine after that. I rerouted my clutch about 5 times and I didn't do anything but make it worse. I ended up going down to the speed shop and getting another cable that was about 1/2" longer, it did the trick. I would highly recommend to anybody going with the Rox +2 riser and Flexx bars, go with a +1-2 extended throttle and clutch cables.
(http://i399.photobucket.com/albums/pp79/4gunz4x4z/1231460594.jpg)
damn, i never get tired of looking at ur bike, whats the total lift on those bars? im a big of a bigger guy and i dont mind the stock bars but im gettin a flex bar and i need to have a new perch anyways so might as well put it where i like it. also isnt the antivibe risers and flex bars a little redundant? or do you still notice a big difference? anyways nice bike man
Nice setup there 4gunz! :thumbs:
Quote from: TechQuadShop on January 08, 2009, 02:43:09 PM
Yep I need to add the new elites to the site. Web guy is doing some changes to the website right now to make it even easier to navigate. Once thats done more products will follow :thumbs:
FYI Steve
Make sure you add the graphics kit too. I get so many people asking how and where I got them!
Quote from: 4gunz4x4z on January 08, 2009, 05:32:19 PM
I put mine on today, they are definitely tight. I rerouted my throttle cable and it was fine after that. I rerouted my clutch about 5 times and I didn't do anything but make it worse. I ended up going down to the speed shop and getting another cable that was about 1/2" longer, it did the trick. I would highly recommend to anybody going with the Rox +2 riser and Flexx bars, go with a +1-2 extended throttle and clutch cables.
(http://i399.photobucket.com/albums/pp79/4gunz4x4z/1231460594.jpg)
How about with the stock bars?
Kamakaze,
Thanks Bro for the complements seriously means alot. My setup is about 1-1 1/4" over stock. I can't answer yet as far as the Anti-vibe risers and the Flexx bars being redundant till after Saturday (doing a 6-8 hour test run). I do know that after I swapped my stock bars to my Flexx bars, I lost about an inch of height and that was definitely in the wrong direction. If the small of your back hurts and or your wrist hurt or start to numb then your bars are to low. After I put on my Flexx bars I want to raise them about 1 1/2-2 inches. Since Rox offered a 2" anti-vibe riser I figured what the hell, right. I'm going to do some dune riding Saturday and some woods riding on Sunday. After that I'll do a write up in the "product review section" :thumbs:
NaturalRaptor, Thanks Bro. :thumbs:
Machelis,
I'm just going to throw out a good guess for you and say definitely a +2 clutch cable and throttle cable. They are super easy to switch out too.
The Elite risers that will allow you to run either a 7/8" or 1 1/8" bar are now up on our site.
http://www.tqsatv.com/products.php?cat=54
Quote from: preddy08 on January 08, 2009, 10:00:42 PM
Quote from: TechQuadShop on January 08, 2009, 02:43:09 PM
Yep I need to add the new elites to the site. Web guy is doing some changes to the website right now to make it even easier to navigate. Once thats done more products will follow :thumbs:
FYI Steve
Make sure you add the graphics kit too. I get so many people asking how and where I got them!
Our graphics kits are badass! They are up on the site now and can be seen here
http://www.tqsatv.com/proddetail.php?prod=TQSgraphics
I have the standard Rox Adjustable 2" risers with flexx bars and love them so you will be in heaven with both the Flexx and anti vibe. Good choice.
Thanks for the heads up 4gunz. Better safe then a headache :help:
I'll pick up longer cables when I go for the spacer. Money's a little tight right now due to snowmobile projects and work cutting my hours, so probably this summer 8)
so 4gunz, did you notice a difference running the rox antivibe? or is it about the same as just the flex bar?
Quote from: kamakazi on January 14, 2009, 07:12:15 PM
so 4gunz, did you notice a difference running the rox antivibe? or is it about the same as just the flex bar?
I like it even better now. I'll do a full write up later this week. I want to snap some pics and compare stock height vs flexx vs flexx with risers....blah blah blah.
4gunz was it you that said the houser 1.1/4houser stem was shorter than stock? can anyone confirm this?Iam going to be getting a new houser stem with antivibe clamp and flexx bars. just need to know ahead of time if i still will need a 2" set of risers on top of this.So i can have all the right parts at once for re assembly :thumbs: thanks in advance
I said that a 1 1/4 houser and flexx bars will be shorter then the stock stem/bar setup. Give me a day or 2 and I'll do a write up with measurements.
hey 4gunz, how tall are u? and would you go with a higher riser if you were to do it again? ive been looking at 3.5" riser, and wondering if its enough/too much. i ordered some new SS cables and was wondering if i needed a brake cable too. your thoughts please.
I noticed you had a braided clutch cable... where did yah get that?
Streamline makes an aftermarket braided clutch cable. Just checked them out. I read they are +2" over stock length. Look like nice stuff.
Really, I couldnt get anything to come up for the raptor beside the oem black vinyl +2..... I'll try again. Cause Im getting the setup next month!
Yup, I just tried, could you post a ling to the page. I still cannot find it.... maybe I am just an idiot!
Quote from: gr8ride4u2luv on January 27, 2009, 09:47:30 PM
Yup, I just tried, could you post a ling to the page. I still cannot find it.... maybe I am just an idiot!
gr8ride, thats a "terrycable" clutch cable. Steve at TechQuadShop has cables all the way up to +12.
Kamakaze.... even though we talked earlier, I probably should post for others. I'm 6' and am happy with my rise. I would definitely NOT go higher, but thats me. This pic does no justice, but It measures 44 3/16ths. The stock bars (no risers) on my bike measured at the same spot is 43 1/8th". I have a 7/8 to 1 1/8th (3/4") turner riser, a 2" 1 1/8th to 1 1/8th rox anti-vibe riser, and 14* ATV Flexx bars. With all that said, I am 1 1/16th" over stock height.
Kamakaze, you mentioned going with a 3.5" rox riser with Flexx right? That will put you between 1.75-2" over your stock setup height. You'll definitely need +2 clutch and throttle, but you got +4's already so your good. :thumbs:
(http://i399.photobucket.com/albums/pp79/4gunz4x4z/1232563137.jpg)
Cool, I'll just get ahold of Steve about them. Next month I'll be getting the bars and risers so I will just add the cables to the list! Thanks 4gunz!
:thumbs:
thanks 4gunz, ya im going to see if i can find something shorter than the 3.5, and again thanks for the help :thumbs:
So how do you like the antivibes?
ya ive been waiting on a reviw for like a month now ???