Just bringing the topic here to keep adding to it:
October 27th 2007:
QuoteWell, I made an executive decision tonight. that I'm done riding for the year. I decided to start pulling everything off.. clean it up and get ready to start movin parts around the country.
(http://www.krandall.com/images/trdown1.JPG)
(http://www.krandall.com/images/trdown2.JPG)
(http://www.krandall.com/images/trdown3.JPG)
Just a pic of my sweet wheels:
(http://www.krandall.com/images/sexywheel.JPG)
QuoteI decided that with my nerfs starting to flake a little bit that I am going to send them with my neighbor who has a friend that does rhino lining, i figure that will be an awesome combo, since they take such a beating.
I'm not to ambitious yet w/ the motor. I pulled the duals off though and started cleaning up the pipes and the cans...
QuoteI've been pondering tearin the whole motor out to get the frame PC'd.. It's something that i've wanted done pretty much since I got the rappy.... but damn that'll be a lot of work
Quotenah, I don't plan on doing anything drastic like yours anyways.. I already know I don't want that much... Right now I AM considering a mild bore though.. Its like.. well...... if I've already got the head off... Why not eh?
But.. It really depends on how far I wanna go... if I do the bore... the frame is comin off for PC'ing.. and if I do THAT.. then I'm going to have the frame gusset'ed. My goal is to have it all done by June. I'd like to run Hare Scrambles next year. So with that said.. I've really gotta get crackin.. Sure its like 8 months away. but seeing i'm only up workin on the quad on weekends.. i got a lot of wrenching time to do.
Thx on the rims! I wish you coulda seen em before the last rally. I didn't have time to make the nice aluminum ring around the paddles.. but that's okay! I really love my black n' Blue theme I got goin.. Black frame would look TO sexy!
yup, Project X has moved on officially. You don't realize how dirty a bike gets underneath all the plastics, so I've been cleanin off the wires/ all under the seat ect.. it's lookin good.. and it sucks knowing that 1 ride in the mud will KILL it
October 28th 2007:
QuoteWell.. Made some more progress today
(http://www.krandall.com/images/polish1.JPG)
(http://www.krandall.com/images/trdown4.JPG)
(http://www.krandall.com/images/trdown5.JPG)
(http://www.krandall.com/images/trdown6.JPG)
QuoteThen... I've been feeling ambitious.. I polished my radiator (just the top and bottom..) It turned out pretty freakin sweet... even though no one will see it.. I figured it was a good test piece just for that fact..
so.. I since I was having some discoloration on my head/cylinder i decided to give it a try.. here's the results thus far.. (I have a hell of a project ahead of me )
The first two pics show kind of what I had started with.
(http://www.krandall.com/images/polish4.JPG)
(http://www.krandall.com/images/polish3.JPG)
(http://www.krandall.com/images/polish5.JPG)
(http://www.krandall.com/images/polish2.JPG)
QuoteI was only using some aluminum polish and steel wool.. I'm going to be investing in some polishing pieces for my dremel to help cut down on both time and damned scrubbin with steel wool
January 5 2008:
QuoteWell, It's been a while since I've posted some pics.. Progress has slowed since snow has fallen, but I'm still thinkin about the rappy nearly every day!!!!!
Here's my new pics.. (note: I'm at my parents place so I don't have all the pics between my last shown pics and what i'm showing now BUT.. I have em)
Here is a pic right after I got the motor pulled and throttle body as well. Sittin on my bench lookin nice and purrrrrdy.
(http://www.krandall.com/images/projectX/teardown1.jpg)
QuoteThis pic
This is a pic of the bare frame.. After looking at what was left after having the motor out. Swinger off... I was like.. Wtf... I might as well go all the way.
Quoteand now..................... What it looks like today!!!!!!!!!!!!!
I found a powder coater that lives about 20 mins from my place in st paul. called him up told him what I wanted.. I got "Stealth Black" the pics don't do it justice.. It's so dang sexy looking!!!!!
(http://www.krandall.com/images/projectX/teardown3.jpg)
(http://www.krandall.com/images/projectX/teardown4.jpg)
(http://www.krandall.com/images/projectX/teardown5.jpg)
(http://www.krandall.com/images/projectX/teardown6.jpg)
QuoteI would have been out in the garage working on it some more, but I got out there tonight, fired up my heater, and about 5 mins later, it died, ran out of propane..... so I said f that and came in, tomorrow and sunday I hope to get it back to a rolling chassis
-Randy
QuoteThinkin new nickname for the rappy will be "Bruiser
Already done for the year?
~Brian
bringing this thread here. (from raptor forum. Just so I can keep updating it)
Februrary 29 2008
QuoteIt's in the works, Bo (VelociRaptor) called and said that the sleeve was backordered (last week) and then found out the company is all together not going to carry the sleeve anymore. He found a new place to order them.. Called 2 days ago. And said mine was #2 to leave his shop. There was one other in front of mine he had to get done.
+2 swing arm shipped out as of the 27th (wednesday)
+2 Axle will be ordered today.
This weekend I'll be tearing the swing arm down pulling the axle out, so I can get the carrier to put in my new swinger
-randy's update o' the day!
March 22 2008:
Quotealrighty, after lots of problems with getting everything lined up for getting the new swinger together, it finally is done!!! PICS!!!
This is where I left off last time I updated. Except I got both sides of the a-arms on..
(http://www.krandall.com/images/projectX/x1.jpg)
QuoteGettin Ready to tear down the stock swing arm! (NOTE: There are 2 allen screws on the stinkin axle nut.. word of advise!)
(http://www.krandall.com/images/projectX/x2.jpg)
QuoteNew Axle :grin_nod:
(http://www.krandall.com/images/projectX/x3.jpg)
QuoteSo Puurrdy :grin_nod:
(http://www.krandall.com/images/projectX/x4.jpg)
QuoteUh-Oh's!!!! NEW SWINGER!!!! +2
(http://www.krandall.com/images/projectX/x5.jpg)
QuoteNot gonna lie.. the welds are some of the best I've seen on a built swinger...... (sorry slc...)
I was kinda bummed it didn't come with the swinger pivot bearings installed
(http://www.krandall.com/images/projectX/x6.jpg)
(http://www.krandall.com/images/projectX/x7.jpg)
(http://www.krandall.com/images/projectX/x8.jpg)
+2 on the swinger!!! (Stock vs' +2)
(http://www.krandall.com/images/projectX/x12.jpg)
(http://www.krandall.com/images/projectX/x13.jpg)
New sprockets!
(http://www.krandall.com/images/projectX/x9.jpg)
just another pretty shot
(http://www.krandall.com/images/projectX/x10.jpg)
+3 on the Axle :grin_nod: :grin_nod: :grin_nod:
(http://www.krandall.com/images/projectX/x11.jpg)
(http://www.krandall.com/images/projectX/x15.jpg)
I decided I'll keep the stock carrier and use that for the new swinger, I decided to start polishing the center (cast aluminum... ) This is about 1 hour into sanding..
(http://www.krandall.com/images/projectX/x14.jpg)
After about 4 hours, I called it GOOD ENOUGH
(http://www.krandall.com/images/projectX/x16.jpg)
(http://www.krandall.com/images/projectX/x17.jpg)
sweet, how much have you invested? :thumbs:
wow, love a thread with a lot of pics :clap:
Quote Krandall
Not gonna lie.. the welds are some of the best I've seen on a built swinger......
If your interested Brad @ RPM Axle can machine & install tapered bearings on the stock carrier :thumbs:
Have you found a swinger solution?
no swinger solution yet. Temporary one is I'm going to throw the stock one back on. but that' wont be for about 3 weeks. :(
Uh Oh's :grin_nod:
(http://www.krandall.com/images/projectX/x19.jpg)
Carrier in the Swinger :thumbs:
(http://www.krandall.com/images/projectX/x20.jpg)
My parking brake mod!
I was reading a while back, and remember people saying you couldn't use the stock perch to keep your brake lever w/ the ASV's AND the PowerMadd hand guards.. o' contrair mo fraire!
I ended up using the stock perch and I cut off everything that i didn't need!! worked out PERFECT! :wootwoot:
(http://www.krandall.com/images/projectX/x21.jpg)
(http://www.krandall.com/images/projectX/x22.jpg)
3-30-2008
Here's where I left off yesterday
(http://krandall.com/images/projectX/x23.jpg)
Here's what was going on in Alabama (the day before!!)
(http://www.krandall.com/images/projectX/x24.jpg)
(http://www.krandall.com/images/projectX/x25.jpg)
(http://www.krandall.com/images/projectX/x26.jpg)
(http://www.krandall.com/images/projectX/x27.jpg)
(http://www.krandall.com/images/projectX/x28.jpg)
(http://www.krandall.com/images/projectX/x29.jpg)
(http://www.krandall.com/images/projectX/x30.jpg)
(http://www.krandall.com/images/projectX/x31.jpg)
(http://www.krandall.com/images/projectX/x32.jpg)
(http://www.krandall.com/images/projectX/x33.jpg)
(http://www.krandall.com/images/projectX/x34.jpg)
(http://www.krandall.com/images/projectX/x35.jpg)
(http://www.krandall.com/images/projectX/x36.jpg)
(http://www.krandall.com/images/projectX/x37.jpg)
(http://www.krandall.com/images/projectX/x38.jpg)
(http://www.krandall.com/images/projectX/x39.jpg)
(http://www.krandall.com/images/projectX/x40.jpg)
(http://www.krandall.com/images/projectX/x41.jpg)
(http://www.krandall.com/images/projectX/x42.jpg)
(http://www.krandall.com/images/projectX/x43.jpg)
04-07-08
Here is JUST after we got the motor in. No motor mounts put in yet. but its starting to look like a quad again!!!! :grin_nod:
http://www.krandall.com/images/projectX/x44.jpg
Here's my co-partner, doin my grunt work for me while I take some pics.
(http://www.krandall.com/images/projectX/x45.jpg)
Josh again workin the header.
(http://www.krandall.com/images/projectX/x46.jpg)
Josh again(again) workin the header.
(http://www.krandall.com/images/projectX/x47.jpg)
My awesome port work done by Bo!!!!! THANK YOU AGAIN!!!!!!!!!!!!!!!!!!!!
(http://www.krandall.com/images/projectX/x48.jpg)
Wiring hooked up, gettin the gas tank on.
(http://www.krandall.com/images/projectX/x49.jpg)
(http://www.krandall.com/images/projectX/x50.jpg)
Putting the barkers on!!!!!!!!!!!!!!
(http://www.krandall.com/images/projectX/x51.jpg)
after sitting for 6 months the battery was almost dead
(http://www.krandall.com/images/projectX/x53.jpg)
(http://www.krandall.com/images/projectX/x54.jpg)
(http://www.krandall.com/images/projectX/x55.jpg)
quit lookin at my ass :lol:
(http://www.krandall.com/images/projectX/x56.jpg)
1st Attempt:
(http://i296.photobucket.com/albums/mm194/krandallsfury/th_randys727startup1.jpg) (http://s296.photobucket.com/albums/mm194/krandallsfury/?action=view¤t=randys727startup1.flv)
2nd Attempt:
(http://i296.photobucket.com/albums/mm194/krandallsfury/th_randys727startup2.jpg) (http://s296.photobucket.com/albums/mm194/krandallsfury/?action=view¤t=randys727startup2.flv)
3rd Attempt:
(http://i296.photobucket.com/albums/mm194/krandallsfury/th_randys727startup3.jpg) (http://s296.photobucket.com/albums/mm194/krandallsfury/?action=view¤t=randys727startup3.flv)
4th and Final!
(http://i296.photobucket.com/albums/mm194/krandallsfury/th_randys727startup4.jpg) (http://s296.photobucket.com/albums/mm194/krandallsfury/?action=view¤t=randys727startup4.flv)
sounds purrrrty! Lookin good so far! :thumbs:
I'll be able to finally add some pics of it now on here.
This is how she looked before the swinger broke :(
(http://krandall.com/images/silverlake/SANY2597.JPG)
(http://krandall.com/images/silverlake/SANY2598.JPG)
wow randy, despite the gay handguards (lol jk) that thing looks REALLY good :thumbs:
I've got handgaurds & dont understand the sarcastic remarks ???
I guess all the fluffy riders don't need them ;)
Quote from: exentix on October 29, 2008, 09:05:27 PM
wow randy, despite the gay handguards (lol jk) that thing looks REALLY good :thumbs:
thanks man :)
I have a few things I'm lookin to do over the winter to "Spruce" her up a bit. Still don't quite have the look I'm going for. But it's really close.
What look are you goin for? ???
Quote from: Bert on October 29, 2008, 11:41:14 PM
I've got handgaurds & dont understand the sarcastic remarks ???
I guess all the fluffy riders don't need them ;)
i was just messing with him, i have the same ones he does. i just said it cas everyone else does :lol:
bastards. :lol:
hand thingys bring the gayness
(http://images.icanhascheezburger.com/completestore/2008/11/1/128700259686114157.jpg)
:rofl:
Just messin' with you Randy.
The handguards don't bother me.
~Brian
:rofl: where did you find that?!
i mean the picture? i know you did the text
Quote from: exentix on November 01, 2008, 09:27:21 AM
i mean the picture? i know you did the text
http://www.raptorsource.com/forum/index.php?topic=2227.0
~Brian
(http://images.icanhascheezburger.com/completestore/2008/11/1/128700271419922999.jpg)
:lol:
~Brian
:rofl: thats horrible brian
haha what u need handguards for in the desert?
Randy is in Minnesnowda, but if he had a dune bike, it would have some sweet handguards on it.
:lol:
~Brian
Quote from: EVL LS1 on November 01, 2008, 12:52:41 PM
haha what u need handguards for in the desert?
Minnesota like brian said..
And brian. You're a bastard. Those are the last pictures I'm posting of myself... ever again. :mad:
:rofl:
I'm just messing with you.
In light of everyone giving you hell about your handguards, I thought I would add fuel to the fire.
~Brian
Did you know he looked like a girl till he was 8 years old.
Quote from: Flynbyu on November 03, 2008, 05:59:55 AM
I'm just messing with you.
In light of everyone giving you hell about your handguards, I thought I would add fuel to the fire.
~Brian
I know I was kidding. :lol:
And Socal.. F*CK YOU! :rofl: damn women.. Did nothing but give you extra ammo.. :mad: :lol: :lol:
Quote from: Socalrappy700 on November 03, 2008, 06:52:23 AM
Did you know he looked like a girl till he was 8 years old.
Lydia spilled the beans, eh?
I bet he had the wedge cut.
:lol:
~Brian
Yup, she gave us a ton of dirt.
According to the family Randy looked like a girl till he was 8.
:rofl:
We need pictures Randy.
:lol:
~Brian
Quote from: Flynbyu on November 03, 2008, 09:11:18 AM
We need pictures Randy.
:lol:
~Brian
emailing Lydia right now.
Bad ass.
~Brian
She doens't have any pics of me when I was a kid. Nor will she get any now. :lol:
:lol:
C'mon man!
~Brian
:rofl: :rofl: :rofl: you guys are bad but it is funny (Sorry Krandall but you would be laughing if it was SoCal)
Pretty sure i could get a picture of him when he was younger... Yo randy... i think you know the one im thinkin... :thumbs:
HAhahHAhahaHAHHAhaa :rofl:
:lol:
Just remember, you're there right next to me. :mad:
Back to the thread...
The new swinger! :clap: :clap: :clap: :clap:
(http://krandall.com/images/projectX/x60.jpg)
(http://krandall.com/images/projectX/x61.jpg)
(http://krandall.com/images/projectX/x62.jpg)
(http://krandall.com/images/projectX/x63.jpg)
looks good man
Sweet :thumbs:
Quote from: RaptorRyan on November 03, 2008, 07:34:06 PM
Pretty sure i could get a picture of him when he was younger... Yo randy... i think you know the one im thinkin... :thumbs:
HAhahHAhahaHAHHAhaa :rofl:
paypal sent.
Quote from: Socalrappy700 on November 04, 2008, 06:30:28 AM
Quote from: RaptorRyan on November 03, 2008, 07:34:06 PM
Pretty sure i could get a picture of him when he was younger... Yo randy... i think you know the one im thinkin... :thumbs:
HAhahHAhahaHAHHAhaa :rofl:
paypal sent.
Ditto 8)
:spam: :spam: :spam: :ot:
That swinger looks pretty damn nice.
That looks pretty freakin' strong.
~Brian
I tried reading quickly though this thread to find an answer, but kept getting side tracked laughing about all the handguard comments. :lol: What kind of swinger is that?
Quote from: wobble on November 04, 2008, 10:28:01 AM
I tried reading quickly though this thread to find an answer, but kept getting side tracked laughing about all the handguard comments. :lol: What kind of swinger is that?
SLC Ladder Bar Swing Arm.
That thing looks sweet! I've got a +2 T-Dub and am seriously thinking about offing it and getting one of those.
I had a t-dub :lol: (Note Signature) :(
Saw that.....and some pics of others.... :mad: That's the biggest reason I'll probably going to get an SLC. Although so far so good with my T-Dub and I've beat the crap out of it in the last year. I keep trying to sell my T-Dub to a buddy, but he just won't go for it. :lol:
looks real good randy show us some pics of it back on the bike.
I like the Power Madds :thumbs:
Quote from: Polarass525 on November 04, 2008, 03:13:52 PM
I like the Power Madds :thumbs:
:jaw: :jaw: :jaw: :jaw:
I think he is the 1st person to ever say that
I think I'll be buying some of these :lol:
http://www.powermadd.com/products/HandguardGauntletATV.html
Quote from: Livingmylife93 on November 10, 2008, 08:43:17 PM
Quote from: Polarass525 on November 04, 2008, 03:13:52 PM
I like the Power Madds :thumbs:
:jaw: :jaw: :jaw: :jaw:
I think he is the 1st person to ever say that
i like em too, i have em on mine :thumbs:
Just mounted the new Fourwerx 100% Carbon Fiber hood today! (And put my headlights and stock plastics on again. 8)
(http://www.krandall.com/images/projectX/x64.jpg)
(http://www.krandall.com/images/projectX/x65.jpg)
(http://www.krandall.com/images/projectX/x66.jpg)
(http://www.krandall.com/images/projectX/x67.jpg)
(http://www.krandall.com/images/projectX/x68.jpg)
(http://www.krandall.com/images/projectX/x69.jpg)
(http://www.krandall.com/images/projectX/x70.jpg)
(http://www.krandall.com/images/projectX/x71.jpg)
(http://www.krandall.com/images/projectX/x72.jpg)
(http://www.krandall.com/images/projectX/x73.jpg)
(http://www.krandall.com/images/projectX/x74.jpg)
I like the hood!
100% carbon fiber? Holy shit!
~Brian
That hood is awesome :thumbs:
Now all you need is a CF tank topper to match :clap: 8)
damn :nana: :nana:
Hey Krandall - Bruiser is looking sexy :thumbs:
more pics of the carbon hood, i just got mien, fourwerx rox
http://www.flickr.com/photos/hitmix300/3102512919/in/photostream/
The CF hood ROX man!!!!!!!!!!!! It awesome
minus all street cred due to hand guards sorry......by the way i thought i was getting a t-dub swinger in the mail ???
I have nice wall art. :lol:
The new headers. :) :) :) :) :)
(http://www.krandall.com/images/projectX/x75.jpg)
(http://www.krandall.com/images/projectX/x76.jpg)
(http://www.krandall.com/images/projectX/x77.jpg)
(http://www.krandall.com/images/projectX/x78.jpg)
looks awesome randy :thumbs:
:ninja: black is shmexy :thumbs:
You forgot to paint your nuts :lol:
Quote from: wastednuts on February 22, 2009, 11:12:38 PM
You forgot to paint your nuts :lol:
Blak nuts might scare him. :lol:
Quote from: PeelsSE2 on February 23, 2009, 12:21:03 AM
Quote from: wastednuts on February 22, 2009, 11:12:38 PM
You forgot to paint your nuts :lol:
Blak nuts might scare him. :lol:
That's funny I don't care who you are :lol:. It looks good Krandall :thumbs:
Nice job.
What did you shoot them with?
~Brian
PlastiCoats VHT 1500° Paint.
3 coats cured in the oven per instructions.
I'll keep everyone updated as to how they hold up. :thumbs:
Cool....err...Hot!
Looks very clean now.
~Brian
oh man i want that! :clap:
Looks good
My monster quad cam cover :)
(Note.... I should haev started it prior, but this is cranking over from sitting nearly 2 weeks :lol: )
(http://i296.photobucket.com/albums/mm194/krandallsfury/th_MOV02915.jpg) (http://s296.photobucket.com/albums/mm194/krandallsfury/?action=view¤t=MOV02915.flv)
That looks incredible. Im SOLD. :thumbs: This is a great thread!
Krandall says oot instead of out...busted mr northerner. :lol:
I'm going to test OOt the new monsterquad cam cover.
Haha looks cool bro. :thumbs:
Quote from: Flynbyu on November 01, 2008, 09:13:27 AM
(http://images.icanhascheezburger.com/completestore/2008/11/1/128700259686114157.jpg)
:rofl:
Just messin' with you Randy.
The handguards don't bother me.
~Brian
:rofl: :rofl: :rofl: